LEG3ND

When performance is your highest priority, LEG3ND is the answer. The LEG3ND shares the same breathing characteristics with the LEG3ND ELITE and LEG3ND MBS. The familiar venturi switch now features an updated and ergonomic design. Overmolded with “soft touch” elastomer, the ergonomically designed switch perfectly controls the venturi effect, either allowing or containing a natural freeflow.​

ABOUT LEG3ND

Product Details

Features

First Stage

  • When the first stage is not connected to a cylinder valve, the Auto Closure Device (ACD) keeps the inlet shut to protect the first stage internal parts from contamination and corrosive water.
    • Preserves the internal lubrication
    • Keeps the inlet filter clean and dry
    • Safer for elevated percentages of oxygen
  • Exceptional cold-water performance is achieved by modernizing Aqua Lung's three anti-freeze properties:
    1. Where there's no moisture, there's no ice: The LEG3ND's integrated dry chamber keeps inner components clean and dry by isolating them from the outside environment
    2. Deep ribs create a large heat exchange surface area that helps to prevent ice forming on the mechanism (+30% vs Glacia / +70% vs Legend 2)
    3. The new overmolded cap delays ice forming over the external diaphragm
  • Auto-Balanced (also known as Over-Balanced)
  • Progressive increase of the working pressure to maintain optimum breathing efforts: Depending on the diver's depth, the working pressure of the first stage is automatically elevated to counteract the increased breathing air density
  • Ergonomically shaped DIN and YOKE screws made of a bi-material “Soft Grip” surface provide a better hold when installing or removing the first stage – especially with cold hands
  • Channeled YOKE screw to prevent water retention.
  • Specialized ACD Dust cap attached to the regulator body to protect the inlet fitting and the ACD system from impacts or damage
  • Perfectly positioned HP and MP ports provide optimal hose routing

Second Stage

  • New front cover opening channels allow water to flow sideways over the diaphragm
    • Radial openings to prevent freeflows when diving in stronger currents
    • Openings widened to reduce peak inspiratory flow by an impressive 20%
  • New overmolded exhaust cover made of elastomer with a “soft touch” effect
  • Overmolded air purge
    • Wide surface area makes regulator purging easier
    • Purge depth controller optimizes air flow with minimal effort
  • Patented Comfobite mouthpiece reduces jaw fatigue and secures the second stage more comfortably.
  • Detachable and reusable mouthpiece clamp allows a quick and simple tool-free mouthpiece change without plastic waste.
  • The enlarged heat exchanger helps to prevent freezing of the second stage mechanism
  • Air channel deflector
    • Directs the air flow evenly during the inhalation phase
    • Streamlined bi-material deflector lowers the exhalation effort
  • Flexible and lightweight Aqua Flex hose with dual protectors

What's in the Box

  • LEG3ND Regulator
  • User's Guide

Care & Maintenance

How to properly care for your Aqua Lung regulator:

 

It is important to provide the proper preventative maintenance in order to ensure the best possible performance and maximum life of your Aqua Lung Regulator. The following maintenance procedures should be performed routinely after each use to ensure that the regulator is cleaned, inspected, and prepared for the next use or for storage.

 

As soon as possible after diving, the regulator should be rinsed thoroughly with fresh water while it is attached to a cylinder and pressurized with air.

 

Rinsing alone, however, will not sufficiently clean the regulator. To clean the regulator as thoroughly as possible Aqua Lung recommends:

 

Attach the regulator to a charged SCUBA cylinder, open the cylinder valve to pressurize the regulator, and thoroughly soak both the first and second-stages in a bath of fresh water.While the regulator is soaking, move the vane adjustment switch on the second stage (if present) back and forth several times from the “MIN” (or “—”) to the “MAX” (or “+”) settings. You may also turn the valve adjustment knob (adjustable models) slightly back and forth—no more than 1/4 turn.

 

After the regulator has been properly soaked, it is important to rinse it vigorously by flushing the mainspring cavity of the first stage regulator (non- environmentally sealed models only), the second-stage mouthpiece, and the openings in the second-stage front cover with a pressurized stream of water. This will remove the deposits of salt and minerals that were loosened during soaking.

 

<<DANGER>> If you use a garden hose, do not use the high pressure jet as this could damage the diaphragm and the internal valve.

 

<<WARNING>> DO NOT depress the purge button, loosen the first stage yoke screw, or turn the second stage adjustment knob all the way “out” (adjustable models) if the regulator is submerged unpressurized. Doing so will allow the entrance of moisture, and will require that the regulator be returned to an Authorized Aqua Lung Dealer for service.

 

Disconnect the regulator and wipe it as dry as possible and then hang it by the first stage to ensure that all remaining moisture drains from the second stages.

Do not leave the regulator exposed to direct sunlight for long periods.

 

When the regulator is completely dry, store in a clean equipment box, or sealed inside a plastic bag. Do not store it where it may be exposed to extreme heat or an electric motor, which produces ozone. Prolonged exposure to extreme heat, ozone, chlorine, and ultraviolet rays can cause premature degradation of rubber parts and components.

 

Never store the regulator while it is still connected to the cylinder valve.

 

<<DANGER>> Do not use any type of solvent or petroleum based substances to clean or lubricate any part of the regulator. Do not expose any part of the regulator to aerosol spray, as some aerosol propellants attack or degrade rubber and plastic materials.

share your passion

#AquaLung